◈
Product Specifications
Item
Description
Printing
Printing Method
Thermal printing
Printing Speed
Up to 5 ips
Resolution 203
dpi
Font
10 SLCS Resident Bitmap Fonts
One SLCS Resident Scalable Font
16 BPL-Z™ Resident Bitmap Fonts
One BPL-Z™ Resident Scalable Font
7 BPL-C™ Resident Bitmap Fonts
23 Code Page
Unicode supported (UTF-8, UTF-16LE, UTF-16BE)
Barcode
1D: Codabar, Code 11, Code 39, Code 93,Code 128,
EAN-13, EAN-8, Industrial 2-of-5, Interleaved 2-of-5,
Logmars, MSI, Plessey, Postnet,
GS1 DataBar (RSS-14), Standard 2-of-5,
UPC/EAN extensions, UPC-A, UPC-E, IMB
2D: Aztec, Codablock, Code 49, Data Matrix, MaxiCode,
MicroPDF417, PDF417, QR code,TLC 39
Emulation
SLCS, BPL-Z™, BPL-C™
Sensor
Paper End Sensor, Black Mark Sensor,
Paper Cover Open Sensor, Label Presence Sensor
Cutter Type
Tear-bar
Language
User language supported
Paper
Paper Form
Label paper
Linerless paper
Paper Type
Thermal Paper
Thermal Paper
Diameter
Max. Ø66 mm (2.60”)
Max. Ø66 mm (2.60”)
Width
25~80mm (0.99”~3.15”)
25~80mm (0.99”~3.15”)
Thickness
0.07~0.15 mm
0.08 ± 0.01mm
◈
Printer Cleaning
If the interior of the printer is dusty, print quality can decline.
In such a case, follow the instructions below to clean the printer.
• Make sure to turn the printer power off prior to cleaning.
• As the print head gets very hot during printing, if intending to clean the print head, turn the
printer power off and wait approximately 10 minute before commencement.
• When cleaning the print head, take care not to touch the heated portion of the print head.
• The print head is susceptible to damage from static electricity, etc.
• Take care not to allow the print head to become scratched and/or damaged in any way.
1) Open the paper cover and remove any paper that may be present.
Use the cleaning pen to clean the printer head in a direction from the center to the
outside.
2) Wipe the print head with a cleaning pen.
3) Remove paper dust from the paper detection sensor using the cleaning pen.
4) Do not use the printer for 10 minutes after cleaning the printer head until the cleaning
agent of the cleaning pen has completely evaporated and dried.
5) Insert the paper and then close the printer’s cover.
◈
WEEE
This marking shown on the product or its literature, indicates that it should
not be disposed of with other household wastes at the end of its working
life. To prevent possible harm to the environment or people from
uncontrolled waste disposal, please separate this from other types of
wastes and recycle it responsibly to promote the sustainable reuse of
material resources. Household users should contact either the retailer
where they purchased this product, or their local government office, for
details of where and how they can take this item for environmentally safe
recycling. Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product should not be
mixed with other commercial wastes for disposal.
◈
Battery Safety Precautions
1. If the battery is not charged after the charging time, stop charging and contact the seller.
2. Store and use the battery where it will not come into contact with liquid (water, salt water,
etc.). There may be a risk of overheating, rupturing or igniting.
3. Avoid exposing the battery to high temperatures over 50
℃
and do not store or use it in
a place with high temperature and humidity. There may be a risk of overheating,
rupturing or igniting. In addition, it may reduce the performance and life of the battery.
There is a risk of explosion, especially when the battery is placed by a fire or stored near
a heating device (e.g., heater, etc.).
4. Be sure to only use an adapter or charger approved by us to charge the battery. Use of
any other adapter or charger may reduce battery performance and life, or cause a risk of
overheating, rupturing or igniting.
5. Avoid causing any strong impact to the battery or throwing it. The protective device
inside the battery may be damaged, which may reduce the battery performance and life,
or there may be a risk of overheating, rupturing or igniting.
6. Do not disassemble or modify the battery. The battery contains safety and protection
devices to prevent danger. It may reduce battery performance and life due to damage, or
there may be a risk of overheating, rupturing or igniting.
◈
Safety Precautions
In using the present appliance, please keep the following safety regulations in order to
prevent any hazard or material damage.
WARNING
Violating following instructions can cause serious injury or death.
CAUTION
Violating following instructions can cause slight wound or damage the
appliance.
☎
BIXOLON Co., Ltd.
●
Website
http://www.bixolon.com
●
Korea Headquarters
(Add.) 7~8F, (Sampyeong-dong), 20, Pangyoyeok-ro241beon-gil, Bundang-gu,
Seongnam-si, Gyeonggi-do, 13494, Korea (ROK)
(Tel.) +82-31-218-5500
●
U.S. Office
(Add.) BIXOLON America Inc. 13705 Cimarron Ave Gardena, CA 90249
(Tel.) +1-858 764 4580
●
Europe Office
(Add.) BIXOLON Europe GmbH, Tiefenbroicher Weg 35 40472 Düsseldorf
(Tel.) +49 (0)211 68 78 54 0
© BIXOLON Co., Ltd. All rights reserved.
Do not use the printer when it is out
of order. This can cause a fire or an
electrocution.
• Switch off and unplug the printer
before calling your dealer.
Do not let water or other foreign
objects in the printer.
• If this happened, switch off and unplug
the printer before calling your dealer.
Use only approved accessories and
do not try to disassemble, repair or
remodel it for yourself.
• Call your dealer when you need these services.
• Do not touch the blade of auto cutter.
Install the printer on the stable surface.
• If the printer falls down, it can be
broken and you can hurt yourself.
Keep the desiccant out of children’s
reach.
• If not, they may eat it.
If you observe a strange smoke, odor
or noise from the printer, unplug it
before taking following measures.
• Switch off the printer and unplug the set from
the mains.
• After the disappearance of the smoke, call
your dealer to repair it.
Do not bend the cable by force or
leave it under any heavy object.
• A damaged cable can cause a fire.
Do not plug in or unplug with your
hands wet.
• You can be electrocuted.
Keep the plastic bag out of children’s
reach.
• If not, a child may put the bag on his
head.
Do not pull the cable to unplug.
• This can damage the cable, which is the
origin of a fire or a breakdown of the printer.
You must use only the supplied
adapter.
• It is dangerous to use other adapters.
Do not plug several products in one
multi-outlet.
• This can provoke over-heating and a fire.
• If the plug is wet or dirty, dry or wipe it before
usage.
• If the plug does not fit perfectly with the outlet,
do not plug in.
• Be sure to use only standardized multi-outlets.
PROHIBITED
ONLY SUPPLIED ADAPTER
PROHIBITED
PROHIBITED
PROHIBITED
PROHIBITED
PROHIBITED
TO UNPLUG
PRINTER
PROHIBITED
PROHIBITED
PRINTER
DISASSEMBLING
PROHIBITED
PRINTER
PROHIBITED
PRINTER
TO UNPLUG
PRINTER
DEALER
