BIXOLON SPP-C200 User Manual Download Page 8

 

Ver. 1.00 

-  8  - 

SPP-C200 

 

 

WARNING & CAUTION 

It's to use the battery properly and prevent danger or physical damage, 
so please keep it. 

 

 

 

 

 

 

 

 

Do not subject the battery to strong impact or throw it. 
Do not disassemble or modify the battery. 
Do not allow battery leakage to come into contact with 
your eyes or skin. Keep the battery out of the reach of 
children and make sure that children do not swallow it. 

Otherwise, it can cause the deterioration of battery 
performance and lifespan, overheating, rupture, or 
ignition.  If  it  comes  in  contact  with  skin  or  is 
swallowed, consult a doctor immediately. 

 

 

If the battery is not to be used for a long time, disconnect it from 
the device being used and keep it in a dry place. Even if it is not 
used for a long time, charge it at least once every 6 months 
while in storage. Do not place the battery in places exposed to high 
temperatures (direct sunlight, inside a car, etc.) or where static 
electricity is generated (near home appliances, etc.), or near heat 
generating devices (heating device, etc.). Do not put the battery in a 
fire, microwave, or high pressure (pressure cooker, etc.). 
Make sure that the product does not come in contact with metals 
(coins, necklaces, etc.) or liquids (water, salt water, etc.). 
Stop using the battery if it develops an odor or any other 
abnormalities such as heat, discoloration, deformation, or leakage 
while using, storing, or charging the battery. 

 

 

Do not be confused about the (+) and (-) terminals 
of the battery. Do not let metal contact the (+) and 
(-) terminals of the battery. If the (+) and (-) 
terminals of the battery are smeared with 
extraneous matter, wipe them clean with a piece of 
dry cloth. 

Otherwise, it can cause deterioration of 

battery performance and lifespan, overheating, 
rupture, or ignition. 

 

 

 

The battery should only be charged using the adapter 
or charger provided by Bixolon, and if charging fails 
after  the  specified  charging  time  (6  hours),  stop 
charging. Do not charge the product longer than the 
charging time specified in this manual. 

Otherwise, it 

can  cause  deterioration  of  battery  performance 
and lifespan, overheating, rupture, or ignition. 
 

 

Store and use the battery within the proper 
operating temperature range. 
- Charging: 0 - 40

  (32 - 104

- In use: -15 - 50

  (5 - 122

- Long-term storage (more than 30 days): 15 - 40

  (5 - 104

Otherwise,  it  can  cause  deterioration  of  battery 
performance  and  lifespan,  overheating,  rupture, 
or ignition. 

 

 

Be sure to turn off the power of the device the battery 
serves  after  use.  When  disposing  of  the  battery, 
completely  discharge  the  battery  and  insulate  the 
terminals with tape, etc. 

Dispose  of  it  in  a  designated  place  according  to 
the relevant laws and regulations of the country. 

 

 

Summary of Contents for SPP-C200


























Reviews: