Ver. 1.00
- 14 -
SPP-C200
2-2 Battery Charging
1) Turn off the printer power.
2)
①
Open the external interface cap.
3) Connect USB Type-C cable
②
to
printer power/cable port.
4) Charge after connecting USB Type-C
cable
③
to your device’s (PDA, PC,
etc.) USB port.
LED
Charge Status
Charge Time
Red LED On
Charging
Within 6 hours
Green LED On
Fully Charged
Red LED Blinking
The battery is not installed
properly
• Charge the battery only after
disconnecting the power to your
device.
•
Use only genuine products supplied by Bixolon.
Otherwise, the product may malfunction or there is a risk of
personal injury.
①
②
③
Power/Cable Port
