6. Technical data
Description
OLC-D1
OLC-K1
Supply voltage
115 VAC; ±10%, 50/60 Hz, 3VA /
230 VAC; ±10%, 50/60 Hz, 3VA /
24 VAC/VDC, ±10%, 50/60 Hz, 3VA
115 VAC; ±10%, 50/60 Hz, 3VA /
230 VAC; ±10%, 50/60 Hz, 3VA
Max media temperature
+120°C
+100°C
Lock-out
Failure
Failure
Low oil level
Wires in cable
5
6
Compressor-start signal input
No
Yes; violet wire
Permitted ambient temperature
Operation: -30°C – +60°C
Storage: -30°C – +80°C
Relative humidity
Max. 95%RH non-condensing. Circuit board is
coated
Relay
Switch voltage 240 VAC, min 24 VAC
Continuous current max 2.5A, min 20mA
Switching capacity 300 VA,
C300 (pilot type use according to UL508)
Fuse required
Max 4A, fast-blow
Enclosure class
Housing IP54; cable outlet pointing downwards
Mounting of the detection circuit
Screw mounted, M24
Max. tightening torque: 10 Nm by hand only
Reset of lock-out state
Interrupt supply power for min. 5 seconds
Cable length
2050 ±50 mm
950 ±50 mm
Weight
252 g
152 g
Dimensions
55.5 mm (w) x 87.0 mm (d) x 57.5 mm (h)
UL file number
E348183
Page 10
