Bittner Audio - Application Handbook
Page 47
3.7.8.2.5.4.
SMTP
SMTP stands for
Simple Mail Transfer Protocol
. The SXL is able, via an appropriate gateway in
the network, to send logbook entries as emails.
To ensure trouble-free transmission of the data, the following parameters need to be set:
Our SMTP Name
Sender’s address
Send Log Message to email address Recipient (email address)
Send by SMTP Gate
Gateway address
Please contact your network administrator for the correct values of above parameters.
3.7.8.2.5.5.
SXL Home Address
The address may be re-called when
Home
in the
navigation menu is called. This address may be used,
for example, to save an overview page for the
selection of several SXL devices in a bigger installation.
3.7.8.2.5.6.
Re-start
The SXL may be re-started from the web interface. This feature is very
useful after upgrading the firmware via the network (refer to 3.7.10.2
Firmware Seite 55).
To re-start, set the checkmark and click
SET.
3.7.8.2.6.
AX16 Intelligent Amplifier Switch
The AX16 device is an intelligent amplifier switching unit that may also be connected to the SXL
via its system bus. Together, both devices form a powerful solution to guarantee a failure-free
operation.
The
AX16
web page offers mainly status information. Practically all settings are made with DIP
switches on the back panel (refer to 3.8.6. Starting Seite 63). These settings are evaluated by the
SXL which takes over control of the AX16 in case of amplifier error.
