Page 38
Bittner Audio - Application Handbook
3.7.7.4.
Monitor Bus
The monitor bus enables the tapping into the
loudspeaker outputs of an appropriately
equipped amplifier. The amplifier is equipped
with one relay for each channel which adds the
line level audio signal to the monitor bus. The
signal will then appear on the PHOENIX terminals
MONITOR OUT.
Additional SXL may be connected to the monitor bus via the PHOENIX terminal MONITOR IN. The
internal logic of the SXL(s) ensures that only one audio signal is switched to the monitor bus (the
amplifier output or the MONITOR IN).
Currently, only the amplifiers of the XR series support that feature.
