Thanks for purchasing a Bittel UNO Voice!
We’ve designed UNO to be easy to use, and easy
to set up. Follow the instructons in this guide to get
your UNO product in service as fast as possible.
Some of UNO’s great features:
• Up to ten (10) programmable speed dial keys
that can be programmed by one of Bittel’s
optional master speed dial cloners.
• An easy-to-install faceplate, for displaying
hotel information, dialing instructions, etc.
• Message waiting compatibility with all
major hospitality PBXs
• Hearing aid compatible handset
• ADA-compliant speaker and handset
volume control
• Adjustable ringer volume, with separate volume
settings for each line (two-line models)
• Busy signal auto-disconnect
• Last number redial, with auto-deletion of last
number dialed after five (5) minutes
• Hands-free speakerphone
• Conference (two-line models)
UNPACKING AND INSTALLATION
Connecting the Two Cases
When you first unpack your UNO, the two cases
need to be assembled, and the connecting cable
between the cases connected.
1. Find the tabs in the upright case, and the
corresponding holes in the bottom base,
and align them.
2. Insert tabs of upright case into holes on bottom
base, and press the two cases together.
3. Slide the bottom base upward until the tabs
in the upright case fully engage the holes in
the base. You should feel the two cases “snap”
or lock together.
