USER MANUAL
Once this phase starts, a dedicated screen allows the visualization of the recorded value:
At the end of the recording, the Bitstream 3X asks if the user wants to save the movements recorded
in the non-volatile memory (the choice is made by choosing OK or CANCEL –step five).
Note 1: If the synchronization of the motion sampler is on internal mode, it is best to verify that the
Bitstream 3X is configured to generate this synchronization, from the menu « midi real-time »
Restitution of a sequence
The restitution of a previously recorded sequence is done very simply, by pressing the automation key
1. It is suggested to follow the following steps (automation « motion » selected):
1- Choose the track to be restituted (regulated by automation knob 1)
2- Start the sequence (press the automation button)
Once the sequence begins, the screen will return to normal and display the values of the different
tracks being restituted.
These different values are updated in real-time and can be visualized on the bar graph.
Rev 1.1 - Page
49
Number of the
control being
sampled
Method of
synchronization of
the sampler
Graphic
Visualisation of
the sequence being
recorded
Contextual Info:
waiting for validation
Progression bar,
corresponding to the
chosen length
Length of the sequence
(in measures)
Number of the track
selected