3
DS902010-009
SW
1
SW
2
SW
3
SW
4
max. Alarmdauer
Alarm duration
ON OFF OFF
OFF
3
min
OFF ON OFF
OFF
5
min
ON ON OFF
OFF 10
min
Abb. / Fig. 3
Thank you for having chosen a quality product of Bitron Home, an Urmet Group brand. Bitron Home
products have been specifically designed for use with the QIVICON platform for which they are approved.
QIVICON enables you to manage and control you smart phone in a really easy way: applications for PC,
tablet and smartphone let you manage all connected devise, at any time and from anywhere.
INSTALLATION OF THE SIREN
INSERT OR REPLACE THE BATTERY
It is advisable to install the siren vertically on an even surface. The device is mounted by 4 screws (fig. 1).
Suitable screws and dowels are included in the packaging of the product. We suggest to register the siren
at the QIVICON Home Base and to run a functional test before fixed mounting.
In the original packaging the 4 alkaline batteries (type D) are not inserted into the device yet. To insert or to
replace the batteries open the case by losing the screw on the bottom of the device, open the battery
compartment by opening the 4 small screws (fig. 1) and then insert the batteries with the correct polarity
(fig. 2). After replacement of the batteries, it is not necessary to register the remote control again.
SET-UP AND OPERATION
In order to set-up this device you need to have a QIVICON home base which is equipped with a QIVICON
ZigBee® radio stick. The home based needs to be set up and you need a valid user account. For further
information, please refer to http://www.qivicon.de/support.
1.
Ensure the batteries have been inserted correctly as described in the previous paragraph.
2. Log on at
Mein QIVICON
(www.qivicon.de/login). Go to
Gerät hinzufügen
and select the
manufacturer
Bitron Home
. Then choose your device “Außensirene”.
3.
Follow the connection wizard’s instructions.
If you wish to associate the device to a different home base, e.g. in case you need to replace the home
base, repeat steps 2 and 3.
In general, it is up to each application for QIVICON to handle the acoustic and visual signals of the siren.
However, it is possible to set up the maximum alarm duration using the DIP switch (fig .3).
Registrierungstaste
Pairing button
DIP Schalter
DIP switch
Sabotagekontakt
Tamper
