Sleep&Go
User’s Manual
534-7AB-MU2 • REV. 1.07
User
’s Manual -
Cardior
espiratory polygraph - Sleep&Go
21
1.3.3 REAR PANNEL
08251 – Battery cover
blocking piece (only with
EXG module).
Battery compartment
(2x AA alkaline or
rechargeable batteries).
1.4 INSTALLATION AND START-UP
This system is made of solid-state professional components
manufactured under stringent quality controls. However,
accidents may occur during the transportation or storage, being
convenient an initial checking of the device and accessories prior
to installation. If you detect a deterioration in the package, please
contact the transport company and your supplier immediately,
prior to installation. Do not dispose the packaging until completely
verifying the proper functioning of the system.
Use only accessories described in this manual. The use of not
recommended accessories could adversely affect both the patient
safety and the equipment.
1.4.1 BATTERY PLACEMENT
The Sleep&Go system uses two 1.5V AA batteries. You can use
alkaline or rechargeable batteries with, at least, 2450mA/h. Using
smaller capacity batteries diminishes the autonomy. The autonomy
in normal use is about 12 hours operating in online mode and 24
hours in holter mode.
