R4
Server
Manual
Last updated: 8/30/2016
Page 8 of 1
1
Page 8 / 1
1
5.2
Frequency Modification
You are able to modify the frequency value through ‘ Configuration->Advanced Settings’. The
default frequency for the R4
server
is 600M.
6
Server
Status
You can check the operating status of your
server
on
the
page
below
.
ASIC#: Number of chips detected in the chain
Frequency: ASIC frequency setting
GH/S(RT): Hash rate of each hash board
Temp(PCB): Temperature of the hash board, centigrade
Temp(Chip): Temperature of the chips on the hash board, centigrade
ASIC status: ‘o’ denotes OK, ‘x’ denotes error ‘-‘ denotes dead.
