background image

- 18 -

T19 Server Installation Guide 

Regulations: 

FCC Notice (FOR FCC CERTIFIED MODELS): 

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause 

harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired 
operation. 

Note:

 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a 
commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in 
accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own 

expense. 

EU WEEE: Disposal of Waste Equipment by Users in Private Household in the European Union 

This symbol on the product or on its packaging indicates that this product must not be disposed of with your other 
household waste. Instead, it is your responsibility to dispose of your waste equipment by handling it over to a 
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection 
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure 

that it is recycled in a manner that protects human health and the environment. For more information about where 
you can drop off your waste equipment for recycling, please contact your local city office, your household waste 

disposal service or the shop where your purchased the product. 

台湾

ROHS: 

設備名稱:

T19    

服務器型號:

240-Ca 

單元

有害物質

(Pb) 

Hg

 

Cd

 

六價鉻

(Cr+6) 

多溴聯苯

PBB

 

多溴二苯醚

PBDE

 

外殼

電路板組件

其他線材

備考

1.

〝超出

0.1 wt %

〞及〝超出

0.01 wt %

〞係指限用物質之百分比含量超出百分比含量基準

 

值。
備考

2.

〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。

 

備考

3.

〝-〞係指該項限用物質為排除項目。

 

Summary of Contents for ANTMINER 240-Ca



















Reviews: