BT-550 Operation manual
49
P/N : 550-ENG-OPM-EUR-R01
Bistos Co., Ltd.
2018.03
4.3.1 Skin sensor
- Clean the sensors with alcohol, or detergent or soap solution.
- Apply the cleaning solution with a clean cloth or sponge, and dry all surfaces after cleaning with a
clean soft cloth or paper towel.
CAUTION:
•
Do not immerse, boil, autoclaves or gas sterilize the sensor.
•
Avoid soaking in alcohols, strong detergents. Or highly alkaline solutions.
•
Ensure the skin sensor is only removed from the controller by grasping the plug at the
front panel. Ensure excessive strain is not placed on the sensor lead either during use,
cleaning or inspection
4.3.2 SpO
2
sensor
- Clean the sensor by wiping it with a 70% isopropyl alcohol pad or mild detergent.
- Dry the sensor and cable with a clean cloth or dry gauze pad.
CAUTION:
•
Do not immerse the connector of YI cable in any liquid solution.
•
Do not sterilize by irradiation, steam, autoclave, Gluteraldehyde (Cidex) or ethylene
oxide.
•
Carefully read 2.8 SpO2 Monitor(option) for proper use, cleaning or inspection
4.3.3 Mattress
- Clean the mattress with an approved and correctly diluted disinfectant-detergent solution, ensuring
the manufacturer’s directions for use of the cleaning agent are followed.
- Apply the cleaning solution with a clean cloth or sponge, and dry all surfaces after cleaning with a
clean soft cloth or paper towel.
CAUTION:
Do not autoclaves or gas sterilize the mattress.
