BT-36 Operation manual 11
P/N:36-ENG-OPM-EXP-R00
Bistos
2022.03
3.5.
Object temperature measurement
①
Turn on the device with pressing START button
②
Check the measurement mode whether is object temperature measurement
mode(
).
③
Place the device 2 ~ 5 cm distance from the object that you want to measure
temperature.
④
Start measurement by pressing START button(
).
When the measurement is complete, you can hear beep sound and the measured
value is displayed on screen. If the device sound is off, wait for a second after you
press the button. If the measured value within the measurable temperature range,
then the blue light is illuminated with the measured value displayed. If the
measured value exceeds the measurable temperature range, then the red light is
illuminated with the error(Err).
(When measuring, any movement may affect the temperature reading.)
3.6.
Memory mode
①
Press the
Memory mode button to switch to memory mode.
②
The temperature is stored in memory from No. 0 to No. 9 in order from the latest
data to the previous data.
③
If there is no other input for a certain period of time, it goes back to Ready screen.
④
Results of object temperature and errors are not stored in memory.
3.7.
Power off
The power is automatically shut down if there is no other input about 15 seconds after
measurement.
3.8.
Battery replacement
When lack of the battery icon(
) displayed on right top of the screen, the battery
should be replaced. (It may be inaccurate if the user measures the temperature value.)
