BISSETT BF-MC0070, User Manual, Page: 15 / 44

15
Caution
1. Put the cover off first and put on the breath pipe and air filter before the
compressor run (Fig.3).
2. Never unscrew any connecting part when the tank is in pressure
condition.
3. Never disassemble any electrical part before disconnecting the plug.
4. Never adjust the safety valve carelessly.
5. Never use the compressor in place where voltage is too low or too high.
6. Never disconnect the plug to stop compressor, set the switch knob in
position off instead.
7. If the release valve doesn’t work as motor stopped, find the cause
immediately so as not to damage motor.
8. Lubricating oil must be clean, oil level should be kept in the score of oil
ruler.
9. Disconnect the plug to cut off power supply and open the outlet valve.
Breath
Pipe
Air Filter
Port
Oil-hole
FIG.3
CAUTION