14
www.BISSELL.com
Troubleshooting
Problem
Possible causes
Remedies
AUTOMATED CLEANING
SpotBot®
will not run
Power Cord not plugged in
Check electrical plug
Blown fuse/tripped breaker
Replace household fuse or reset
breaker
Flex Hose is not snapped into
place securely
Check to make sure the hose is
snapped into place
Unusual
noise
Clean Water/Formula Tank is
out of fluid
Fill tank
Reduced or
no spray
Clean Water/Formula Tank is
out of fluid
Fill tank
Clean Water/Formula Tank
is not inserted into the unit
securely
Gently press the tank until you see
bubbles coming from the base of the
tank
No suction
Tank is full
Empty tank
Dirty Water Tank latch is not
down
Push latch down so tank secures into
place
Black valve on the Dirty Water
Tank is missing
Replace black valve into tank
MANUAL CLEANING
Cleaner will
not run
Power Cord not plugged in
Check electrical plug
Blown fuse/tripped breaker
Replace household fuse or reset
breaker
Hose not removed from
receiver
Remove hose
SpotBot shut OFF automatically
during use
Press
Pause/Resume
button to resume
manual cleaning
Unusual
noise
Clean Water/Formula Tank is
out of fluid
Fill tank
Reduced or
no spray
Spray tip clogged on Tough
Stain Brush
Clean spray tip
Clean Water/Formula Tank is
out of fluid
Fill tank
Clean Water/Formula Tank
is not inserted into the unit
securely
Gently press the tank until you see
bubbles coming from the base of the
tank
No suction
Tank is full
Empty tank
Dirty Water Tank latch is not
down
Push latch down so tank secures into
place
Black valve on the Dirty Water
Tank is missing
Replace black valve into tank
WARNING
To reduce the risk of electric shock, turn Power Switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
