background image

www.BISSELL.com

2

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

 

»

Connect to a properly grounded outlet only. See 

grounding instructions. Do not modify the 3-prong 

grounded plug.

 

»

Do not leave appliance when it is plugged in. Unplug 

from outlet when not in use and before servicing.

 

»

Do not expose to rain. Store indoors.

 

»

Do not allow to be used as a toy. Close attention is 

necessary when used by or near children.

 

»

Do not use for any purpose other than described 

in this user guide. Use only manufacturer’s 

recommended attachments.

 

»

Do not use with damaged cord or plug. If appliance 

is not working as it should, or has been dropped, 

damaged, left outdoors, or dropped into water, have 

it repaired at an authorized service center.

 

»

Do not pull or carry by cord, use cord as a handle, 

close a door on cord, or pull cord around sharp edges 

or corners.

 

»

Do not run appliance over cord. Keep cord away from 

heated surfaces.

 

»

Do not unplug by pulling on cord. To unplug, grasp 

the plug, not the cord. 

 

»

Do not handle plug or appliance with wet hands.

 

»

Do not put any object into openings. Do not use with 

any opening blocked; keep openings free of dust, lint, 

hair, and anything that may reduce air flow.

 

»

Keep hair, loose clothing, fingers, and all parts of 

body away from openings and moving parts of the 

appliance and its accessories.

 

»

Turn OFF all controls before plugging or unplugging 

appliance.

 

»

Use extra care when cleaning on stairs.

 

»

Do not use to pick up flammable or combustible 

materials (lighter fluid, gasoline, kerosene, etc.) or use 

in areas where they may be present.

 

»

Do not use appliance in an enclosed space filled with 

vapors given off by oil-based paint, paint thinner, 

some moth-proofing substances, flammable dust, or 

other explosive or toxic vapors.

 

»

Do not use to pick up toxic material (chlorine bleach, 

ammonia, drain cleaner, etc.).

 

»

Do not pick up anything that is burning or smoking, 

such as cigarettes, matches or hot ashes.

 

»

Do not pick up hard or sharp objects such as glass, 

nails, screws, coins, etc.

 

»

Do not use without filters in place.

 

»

Use only BISSELL® cleaning formulas intended for use 

with this appliance to prevent internal component 

damage. See the “Cleaning Formulas” section of this 

guide. 

 

»

Do not immerse. Use only on surfaces moistened by 

the cleaning process.

 

»

Keep appliance on a level surface.

 

»

Do not carry the appliance while in use.

 

»

Always install float before any wet pick-up operation.

 

»

Unplug before connecting TurboBrush® Tool.

 

»

Plastic film can be dangerous. To avoid danger of 

suffocation, keep away from children.

 

»

If your appliance has a motorized Brush Roll, do not 

leave machine running in the same spot without the 

handle fully upright.

 

»

Liquid must not be directed towards equipment 

containing electrical components.

 

»

Use only the type and amount of liquids specified 

under the operations section of this guide.

 

»

Use only on carpet moistened by cleaning process.

READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER. 

When using an electrical appliance, basic precautions should be observed, including the following:

WARNING

Improper connection of the equipment-grounding conductor can result in 

a risk of electrical shock. Check with a qualified electrician or service person 

if you aren’t sure if the outlet is properly grounded. DO NOT MODIFY THE 

PLUG. If it will not fit the outlet, have a proper outlet installed by a qualified 

electrician. This appliance is designed for use on a nominal 120-volt circuit, and 

has a grounding attachment plug that looks like the plug in the illustration. 

Make certain that the appliance is connected to an outlet having the same 
configuration as the plug. No plug adapter should be used with this appliance. 

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded 

wiring system. If it should malfunction or break 

down, grounding provides a safe path of least 

resistance for electrical current, reducing the risk 

of electrical shock. The cord for this appliance 

has an equipment-grounding conductor and a 

grounding plug. It must only be plugged into an 

outlet that is properly installed and grounded in 

accordance with all local codes and ordinances.

Grounded 

Outlet

Grounding Pin

SAVE THESE INSTRUCTIONS 

THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER’S WARRANTY.

Summary of Contents for REVOLUTION PET PRO









































Reviews: