P
repared by Monique Lania
8
Call Servicing Guide QuickWash
1950F.doc
Solution 6:
Is the hole free of any clogs or debris?
Yes
Yes
No, clean out the hole with a paper
clip. Does unit spray now?
Yes, problem solved
Yes, problem solved
No, refer customer to an Authorized Service centre
Check the tiny hole marked ‘vent hole’ (at the top, on the back of the solution tank), holding the solution tank
upright with the black cap insert at the bottom. Is the water level in the solution tank below the hole?
No, tip out solution, making sure it is only filled to
‘full’ on the fill line. Does the unit spray now?
Yes, problem solved
No, refer consumer to an Authorized Service Center
Remove the solution tank from the machine
No, refer customer to an
Authorized Service centre
Clean out the holes on the spray bar with a paper clip. Does the unit spray now?
Check holes on blue spray bar on the base of the unit next to the brush head
