background image

w w w. b i s s e l l . c o m  

A

ssembly 

1. 

Slide upper body into lower body. 

2. 

Secure with screws.

3. 

Slide handle assembly down into upper body 

until it will go no further. Align screw slots.

4. 

Secure with screw.

5. 

Place clean water/solution tank on back of unit.

special features

scotchgard™ protector

Carpet protection applied at the mill typically 

wears down over time from heavy foot traffic and 

everyday cleaning, including deep cleaning. To 

help restore this important protection, only BISSELL 

offers cleaning formulas with Scotchgard protector. 

This offers extra protection against dirt and tough 

stains to keep your carpets looking good longer.

before you clean

1. 

Remove easily moved furniture (chairs, 

lamps, coffee/cocktail tables, etc.) from 

room if needed.

2. 

Vacuum carpet thoroughly.

3. 

Decide where to begin. Plan to leave 

a path open to empty soiled water and 

refill cleaner.

note: carpeting will dry in three to four 

hours, depending on carpet style and air cir-

culation in room. a floor fan speeds drying.

fill the tank

1. 

Remove the clean water/solution tank by 

lifting it straight up, then away from the 

lower body.

2. 

Unscrew the black cap at the bottom of 

the clean water/solution tank.

3. 

fill to the foRmULA line with BISSELL clean-

ing formula. fill the rest of the tank with hand 

hot (not boiling) tap water to the water fill line. 

Replace and tighten the black cap.  

4. 

Place clean water/solution tank on  

lower body.

5. 

Rotate Quick Release Cord Wrap™ to release 

the power cord and plug into an outlet.

5

O

perations

1.

5.

3.

2.

4.

Tip:

Always vacuum 

thoroughly before 

you deep clean. 

If possible, move 

large furniture to an 

area you will not 

be cleaning.

2.

WaRning:

To reduce the risk of fire, use only 

BISSELL Advanced Cleaning Formulas 

for full size machines in your deep 

cleaner. Use of cleaning formulas 

that contain lemon or pine oil may 

damage this appliance and void 

warranty. Chemical spot cleaners or 

solvent-based soil removers should 

not be used. These products may 

react with the plastic materials used in 

your deep cleaner, causing cracking 

or pitting.

Tip:

Deep cleaning 

spots, spills and 

high traffic areas 

on a regular 

basis can pro-

long carpet life.

Summary of Contents for QUICKWASH 1970 Series













Reviews: