www.bissell.com
800.237.7691
5
1.
slide upper body into lower body.
2.
secure with two screws.
3.
slide handle assembly down into upper body
until it will go no further. Align screw slots.
4.
secure with screw.
5.
Place solution tank on back of unit.
before you clean
1.
Remove easily moved furniture (chairs, lamps,
coffee/cocktail tables, etc.) from room if needed.
2.
Vacuum carpet thoroughly.
3.
Decide where to begin. Plan to leave a path
open to empty soiled water and refill cleaner.
notE: carpeting will dry in three to four hours,
depending on carpet style and air circulation in
room. a floor fan speeds drying.
fill the tank
1.
Remove the solution tank by lifting it straight
up, then away from the lower body.
2.
Unscrew the black cap on the solution tank.
3.
Fill to the FORMUlA line with bissell
2X formula. Fill the rest of the tank with hot
(140°F/60°C MAX) tap water to the WATeR fill
line. Replace and tighten the black cap.
*Do not
boil or microwave water as it can destroy the
bladder.
4.
Place solution tank on lower body.
5.
Rotate Quick Release Cord Wrap™ to release
the power cord and plug into an outlet.
Using boost
For an extra cleaning boost, use bissell boost
with your cleaning solution.
1.
Fill the clean tank with water and cleaning for-
mula following the instructions in step 3 above.
2.
Add 1 oz. of bissell boost to the solution.
3.
Replace the cap on the tank and replace
the tank on the machine.
Assembly
Operations
» Deep cleaning
spots, spills, and
high traffic areas
on a regular basis
can prolong
carpet life.
Tip
» Always vacuum thoroughly
before you deep clean. If possible,
move large furniture to an area you
will not be cleaning.
Tip
3.
2.
2.
1.
4.
5.
WaRnInG
Do not plug in your deep cleaner until you are familiar
with all instructions and operating procedures.
