9
w w w . b i s s e l l . c o m
Emptying the dirt container
The dirt container needs to be emptied when the
dirt reaches the “full” line on the back of the
container.
1.
Press the release button on the top of the
carrying handle to remove the dirt container.
2.
Hold the dirt container over trash can and
push the emptying button to open the bottom.
Close the dirt container door when empty.
3.
Replace dirt container on cleaner by
aligning the bottom and pushing forward
until it snaps into place.
Cleaning the inner cyclone
Unplug the vacuum from electrical outlet.
1.
The inner cyclone can be reached by
removing the dirt container, releasing the
debris door, reaching inside the tank and
turning the entire assembly counter
clockwise unlock. Pull straight down to
remove.
2.
The inner cyclone and screen may be
separated for cleaning. Simply twist to
unlock & firmly pull up on the screen to
separate. Clean the screen with a cloth or
soft brush to remove dust and debris.
3.
The tank may also be wiped clean with a
damp cloth. Make sure tank is completely
dry before reassembling.
4.
To reassemble, hold the carry handle and
place the inner cyclone assembly back
into tank and turn clockwise to lock. The
section on the screen with no holes should
be aligned with cyclone inlet. Close the
bottom of the debris door after replacing.
M
aintenance and care
1.
2.
1.
2.
Screen
