background image

18

About your warranty

One Year Warranty

BISSELL Ltd., or an Authorized BISSELL Service Centre will repair or
replace, free of charge, any part which is defective or malfunctioning
within 1 year of the purchase date, provided that it is used for personal
and not commercial or rental service.

PLEASE CALL, TOLL FREE, 1-800-263-2535 to obtain an
Authorized BISSELL Service Centre in your area.

Terms:

1. Return the unit and/or part with proof of purchase date, to your dealer,

your nearest BISSELL Authorized Service Centre, or return by mail to.

BISSELL Ltd.,
6934 Kinsmen Court,
Niagara Falls, Ontario, L2E 6S5

2.  Any defective or malfunctioning part will be repaired or replaced and

returned postage paid.

3.  This warranty does not cover belts, filters or light bulbs.

For your protection, you should always insure the unit and/or part
when shipping or mailing. BISSELL will reimburse you for the parcel
post, CanPar or UPS charge. Any charges for packaging or insurance
are your responsibility.

Tip: Attach your sales receipt to this User’s Guide for future reference.

BISSELL Customer Service

For information about repairs or replacement parts, or questions about your warranty, call:

BISSELL Customer Service

1-800-263-2535

Monday - Friday
8 A.M. — 4:30 P.M.  (E.S.T.)

Or write:

BISSELL Ltd.
Attn: Customer Service
Box 1003,
Niagara Falls, Ont., L2E 6W2

When contacting BISSELL, have model number of unit available.
Please record your Model Number: ___________________
Please record your Purchase Date:  ___________________

NOTE:  Please keep your original sales receipt. It is your warranty.

It is suggested you staple your original receipt to the
front of this guide.

©1998 BISSELL Inc.

BISSELL Ltd.,
Niagara Falls, Ont., L2E 6W2
All rights reserved. Printed in USA
Part Number 010-5855

Visit our web site at:
http://www.bissell.com

WARNING:

Use only

BISSELL cleaning Formulas
in your POWERSTEAMER

®

.PROHEAT

PLUS. Use of

cleaning formulas which
contain lemon or pine oil
may damage this appliance
and void warranty. Chemical
spot cleaners or solvent-
based soil removers should
not be used. These products 
may react with the plastic
materials used in your 
POWERSTEAMER

®

PROHEAT

PLUS causing cracking 
or pitting.

Summary of Contents for PROHEAT PLUS 1698 POWERSTEAMER


















Reviews: