This user’s guide has been designed to help you
get the utmost satisfaction from your BISSELL
PROheat All-Rounder. You’ll find assembly and
operating instructions, safety precautions,
as well as maintenance and troubleshooting
instructions. Please read this user's guide
thoroughly before assembling your product.
Pay particular attention to the product diagram,
assembly instructions, and part names. Locate
and organize all parts before assembly. Familiarize
yourself with the parts and where they go.
Following this user’s guide will greatly enhance
your ability to get the most performance from your
BISSELL PROheat All-Rounder for many years.
Your PROheat All-Rounder is easy to assemble and
requires no tools:
1
.
Attach hose to Quick Release™ Hose Door
by inserting fitted end and turning clockwise
until you hear it click into the locked position.
2
.
Attach hose solution line to unit by inserting
fitted end into the machine. Turn clockwise
until it snaps into place.
3
.
Snap the two wand pieces together by
lining up tabs with holes and clicking
together. Be sure that the wand piece with
the adaptor (see figure 4a) is the one you will
attach to the tool to. Attached assembled
wand to grip using the same technique.
4
.
Snap the desired tool on the end of the wand.
Place wand adaptor into the wand caddy on
the side of the unit.
5
.
Place either tool caddy or solution tank (if
wet clean mode is desired) onto the back of
the machine.
H
ow to use this guide
6
w w w . b i s s e l l . c o m
A
ssembly
WARNING:
Do not plug in your
cleaner until you have
completely assembled it per
the following instructions
and are familiar with all
instructions and operating
procedures.
Wand Adaptor
1
2
3
4
4a
Wand Caddy
5
