8
BISSELL.com
4
1
2
3
Cleaning Your Carpet
Press the Power
Switch to turn the
machine ON. To
recline your machine
for use, press the
Recline Pedal with
your foot.
Plug into a properly
earthed outlet.
NOTICE:
To prevent damage to Berber carpets, avoid repeated strokes in the same area.
Express Clean Mode:
Recommended Cleaning
Pace: 30.5cm/s
1. Press the Spray Trigger
to apply solution while
making 2 wet passes
(1 forward, 1 back).
2. Release the Spray Trigger.
3. Make 2 dry passes (1
forward, 1 back) to suck
up the dirty solution.
Do not hold down the
trigger for this step.
Deep Clean Mode:
Using BISSELL® Wash &
Antibacterial
Formula
1. Press the Spray Trigger
to apply solution while
making 3 slow, wet passes
(1 forward, 1 back, and 1
forward again).
2. Release the trigger.
3. Make 1 slow, dry pass
back to suck up the dirty
solution.
Do not hold
down the trigger for this
step.
Standard Cleaning
1. Press the Spray Trigger
to apply solution while
making 2 slow, wet
passes (1 forward,
1 back).
2. Release the Spray Trigger.
3. Make 2 slow, dry passes
(1 forward,
1 back) to suck up the
dirty solution.
Do not
hold down the trigger
for this step.
Select Cleaning Mode:
Deep Clean:
Delivers a deep clean to
your carpet. Dry Time: About 8 hours
Express Clean:
Provides a lighter
clean. Dry Time: About 30 minutes
*Choose “Deep Clean” mode and use
BISSELL® Wash & Antibacterial
to deliver antibacterial benefits.
2
1
Cleaning with CleanShot
Press the CleanShot
button with your foot.
The window of the button
will be green and show an
“I” symbol when it is on.
Spray will continue until you
turn it OFF. To turn CleanShot
OFF, press the button with your
foot. The window of the button
will be red and show an “O”
symbol when it is off.
Completely cover the stain with
CleanShot spray. Allow the stain
to soak. To extract, manoeuvre
the foot of the machine over the
stain to brush and remove.
