background image

www.BISSELL.ca

5

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE, 

ELECTRIC SHOCK OR INJURY:

»  Connect to a properly grounded 

outlet only. See grounding 

instructions. Do not modify the 

3-prong grounded plug.

»  Do not leave appliance when 

it is plugged in. Unplug from 

outlet when not in use and 

before servicing.

»  Do not expose to rain. Store indoors.

»  Do not allow to be used as a 

toy. Close attention is necessary 

when used by or near children.

»  Do not use for any purpose 

other than described in this user 

guide. Use only manufacturer’s 

recommended attachments.

»  Do not use with damaged cord or 

plug. If appliance is not working 

as it should, or has been dropped, 

damaged, left outdoors, or 

dropped into water, have it repaired 

at an authorized service center.

»  Do not pull or carry by cord, 

use cord as a handle, close 

a door on cord, or pull cord 

around sharp edges or corners.

»  Do not run appliance over cord. 

Keep cord away from heated 

surfaces.

»  Do not unplug by pulling on  

cord. To unplug, grasp the plug, 

not the cord. 

»  Do not handle plug or appliance 

with wet hands.

»  Do not put any object into 

openings. Do not use with any 

opening blocked; keep openings 

free of dust, lint, hair, and 

anything that may reduce air flow.

»  Keep hair, loose clothing, 

fingers, and all parts of body 

away from openings and 

moving parts of the appliance 

and its accessories.

»  Turn OFF all controls before 

plugging or unplugging appliance.

»  Use extra care when cleaning 

on stairs.

»  Do not use to pick up 

flammable or combustible 

materials (lighter fluid, gasoline, 

kerosene, etc.) or use in areas 

where they may be present.

»  Do not use appliance in an 

enclosed space filled with vapors 

given off by oil-based paint, paint 

thinner, some moth-proofing 

substances, flammable dust, or 

other explosive or toxic vapors.

»  Do not use to pick up toxic  

material (chlorine bleach,  

ammonia, drain cleaner, etc.).

»  Do not pick up anything that 

is burning or smoking, such as 

cigarettes, matches or hot ashes.

»  Do not pick up hard or sharp 

objects such as glass, nails, 

screws, coins, etc.

»  Do not use without filters in place.

»  Use only BISSELL® cleaning 

formulas intended for use 

with this appliance to prevent 

internal component damage. 

See the “Cleaning Formulas” 

section of this guide. 

»  Do not immerse. Use only on  

surfaces moistened by the  

cleaning process.

»  Keep appliance on a level surface.

»  Do not carry the appliance 

while in use.

»  Always install float before any 

wet pick-up operation.

»  Unplug before connecting 

TurboBrush® Tool.

»  Plastic film can be dangerous. 

To avoid danger of suffocation, 

keep away from children.

»  If your appliance has a motorized 

Brush Roll, do not leave machine 

running in the same spot without 

the handle fully upright.

»  Liquid must not be directed 

towards equipment containing 

electrical components.

»  Use only the type and amount 

of liquids specified under the 

operations section of this guide.

»  Use only on carpet moistened 

by cleaning process.

READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER. 

When using an electrical appliance, basic precautions should be observed, including the following: 

This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.

SAVE THESE INSTRUCTIONS  

FOR FUTURE USE

WARNING

Improper connection of the equipment-grounding 

conductor can result in a risk of electrical shock. Check 

with a qualified electrician or service person if you 

aren’t sure if the outlet is properly grounded. DO NOT 

MODIFY THE PLUG. If it will not fit the outlet, have a 

proper outlet installed by a qualified electrician. This 

appliance is designed for use on a nominal 120-volt  

circuit, and has a grounding attachment plug that 

looks like the plug in the illustration. Make certain 

that the appliance is connected to an outlet having 

the same configuration as the plug. No plug adapter 

should be used with this appliance.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded  

wiring system. If it should malfunction or break down, 

grounding provides a safe path of least resistance for 

electrical current, reducing the risk of electrical shock. 

The cord for this appliance has an  

equipment-grounding conductor  

and a grounding plug. It must  

only be plugged into an outlet  

that is properly installed and  

grounded in accordance with  

all local codes and ordinances.

Grounded 

Outlet

Grounding Pin

Summary of Contents for PROHEAT 2X REVOLUTION 1986 Series













































Reviews: