background image

w w w. b i s s e l l c o m m e r c i a l . c o m   8 0 0 . 2 4 2 . 1 3 7 8

T

hanks for buying a BISSELL BigGreen Commercial Vacuum

 2

We’re glad you purchased a BISSELL vacuum. Everything we know  
about floor care went into the design and construction of this complete, 
high-tech home cleaning system.  

Your carpet cleaner is well made, and we back it with a limited  
90-day warranty. We also stand behind it with a knowledgeable,  
dedicated Consumer Care department, so, should you ever have  
a problem, you’ll receive fast, considerate assistance.

My great-grandfather invented the floor sweeper in 1876. Today,  
BISSELL is a global leader in the design, manufacture, and service of 
high quality homecare products like your carpet cleaner.

Thanks again, from all of us at BISSELL. 

Mark J. Bissell 
President & CEO

Grounding Instructions

This appliance must be grounded. If it should 

malfunction or break down, grounding pro-

vides a path of least resistance for electric 

current to reduce the risk of electric shock. This 

appliance is equipped with a cord having an 

equipment-grounding conductor and ground-

ing plug. The plug must be inserted into an 

appropriate outlet that is properly installed and 

grounded in accordance with all local codes 

and ordinances.

WARNING:  

Improper connection of the equipment-ground-

ing conductor can result in a risk of electrical 

shock. Check with a qualified electrician or 

service person if you are in doubt as to wheth-

er the outlet is properly grounded. Do not 

modify the plug provided with the appliance 

– if it will not fit the outlet, have proper outlet 

installed by a qualified electrician. 
This appliance is for use on a nominal 120-V 

circuit, and has a grounded plug that looks 

like the plug illustrated in sketch A Figure 1. A 

temporary adaptor that looks like the adaptor 

illustrated in sketches B and C may be used 

to connect this plug to a 2-pole receptacle 

as shown in sketch B if a properly grounded 

outlet is not available. The temporary adaptor 

should be used only until a properly grounded 

outlet (sketch A) can be installed by a qualified 

electrician. The green colored rigid ear, lug, 

or the like extending from the adaptor must be 

connected to a permanent ground such as a 

properly grounded outlet box cover. Whenever 

the adaptor is used, it must be held in place by 

a metal screw.

Exception: In Canada, the use of a temporary 

adaptor is not permitted by the Canadian 

Electric Code, C22.1.

Summary of Contents for PRO POWERForce 1451 SERIES

















Reviews: