O
peration
7
w w w . b i s s e l l . c o m
Fill the 2-in-1 water tank (continued)
3.
Carry like a bucket to the sink. Rotate the
handle forward to unlatch the lid. Remove lid,
turn over and locate built in measuring cup.
4.
Fill formula to the indicated fill line on the
built in measuring cup and pour into mouth
of the bladder.
5.
Fill up the bladder with clean hand hot tap water.
*Do not boil or microwave water as it can
destroy the bladder.
6.
Replace the top of the tank by matching
the lid and tank edges. Handle must be in
the forward position in order to replace lid.
Rotate the handle to the carrying position to
latch the lid.
Note: Remember to secure the lid and test
to make sure it is secure before picking up
the tank.
7.
Place tank into machine base, seating firmly
in place. Rotate tank handle back into latched
position. Bring machine handle back into
upright position.
Carpet cleaning strokes
1.
Plug the deep cleaner into a proper outlet
and turn the power switch ON
( I )
. The
switch is located on the back of the unit.
2.
With your foot, press the handle release
lever on the back of the lower body of unit.
3.
While pressing the spray trigger, make one
slow forward wet pass and another back.
Let the BISSELL advanced deep cleaning
formula and DirtLifter PowerBrush do the
work for you.
Caution: Do not over wet.
4.
Release the spray trigger and make one
slow forward and backward pass over the
same area to remove any residual dirty
water and aid in drying.
5.
Repeat cleaning passes until solution being
pulled up appears clean. Continue passes
without pressing the spray trigger until you
can’t see any more water being suctioned up.
3.
7.
Tip:
Thorough vacuuming
before deep cleaning will prevent
early clogging of the lint trap.
WARNING:
To reduce the risk of fire
and electric shock due to
internal component
damage, use only BISSELL
cleaning fluids intended for
use with the deep cleaner.
Non-BISSELL cleaning
solutions may harm the
machine and void
the warranty.
5.
6.
4.
