6
This easy-to-use system is designed with a bladder inside to
hold clean water. As you clean, the bladder will empty. Dirty water
collects in the tank outside the bladder.
NOTE: Make sure to add formula to the tank
before filling it with water.
Depress the Handle Release pedal to tilt back the handle.
Lift the Tank-in-Tank™ handle. The handle locks the lid
in place. Carry the Tank-in-Tank™ like a bucket to fill at
the sink.
Set the Tank down and rotate the handle forward to
unlatch the Lid. Lift off and set the Lid aside.
Using the Measuring Cup, pour BISSELL Deep Cleaning
Formula into the mouth of the bladder.
Fill to the bottom of the neck with hot tap water. Do not
boil or microwave water.
NOTE: Fill slowly to reduce sudsing.
Replace the Tank Lid, matching the Lid and Tank edges.
Rotate the handle to carrying position. Replace Tank in
machine base, seating firmly in place. Rotate handle
back down to latched position.
NOTE: Remove the Tank-in-Tank, following
steps 1 and 2 at the top of the page.
Carry the Tank-in-Tank, like a bucket, to the sink.
Remove Tank Lid. Pour out dirty water.
After each use, remove and rinse the Lint Screen located
on the Tank Lid.
A.
Remove Tank Lid.
B.
Remove Lint Screen and rinse under faucet.
Remove any debris caught in Lint Screen.
C.
Re-insert Lint Screen on Tank Lid. The screen will
click into place.
D.
Replace Tank Lid.
Refill with cleaning solution and clean tap water—follow
steps 3-5 above.
When a cleaning job is complete, rinse out the Tank-in-
Tank by running clean water between the bladder and
the tank.
Return the Tank-in-Tank to the machine, follow step 6
above.
Refer to the Maintenance/Storage section on the next
page for final cleanup.
1.
2.
3.
1.
2.
4.
To Fill The Tank-in-Tank
When It’s Time To Empty The Tank-in-Tank
3.
5.
6.
4.
5.
6.
5
1
2B
2C
Lint Screen
Latched
Tip:
A special red float device
in the tank will cause the
cleaner to stop removing
solution from the carpet.
The motor sound will rise
in pitch to let you know
the dirty water tank is full.
Lint Screen
2
Lift and Carry
Tilt Handle Back
Handle Release
1
4
Rotate Handle
to Unlatch
3
6
5
