Quick Start Guide
www.bissell.com
www.bissell.com
2
3
CARTON CONTENTS
A. Vacuum Base
B. Handle
C. Screws (2)
D. Hose Wand Clip
E. TurboBrush
®
Tool
*Note: Crevice tool is located inside Extension Wand
F. Dusting Brush
G. Hose
H. Crevice Tool
I. Extension Wand
J. Long Reach Dusting Tool
A
B
E
F
G
H
I
J
C
D
*Product images may vary
Assembly
1.
slide handle onto machine base
2.
screw 2 screws into existing holes with Phillips-head
screwdriver
3.
insert hose wand clip into back of vacuum base and
twist clockwise
4.
line up tabs on the cuff of the hose with the notches
on back of vacuum, twist hose clockwise to lock into place
5.
slide other end of hose into hose wand base and place
hose over upper hose wrap on the handle
6.
slide tools into place
ImpoRtAnt SAfEty InStRUctIonS
WARnInG
To reduce The risk of fire,
elecTric shock, or injury:
» Always connect to a polarized
outlet (one slot is wider than
the other). Do not modify the
polarized plug to fit a non-polar-
ized outlet or extension cord.
» Do not leave vacuum cleaner
when it is plugged in. Unplug
from outlet when not in use
and before servicing.
» Do not use outdoors or on
wet surfaces.
» Do not allow to be used as a toy.
Close attention is necessary when
used by or near children.
» Do not use for any purpose other
than described in this User’s
Guide. Use only manufacturer’s
recommended attachments.
» Do not use with damaged cord or
plug. If appliance is not working
as it should, has been dropped,
damaged, left outdoors, or
dropped into water, have it repaired
at an authorized service center.
» Do not pull or carry by cord, use
cord as a handle, close a door on
cord, or pull cord around sharp
edges or corners. Do not run
appliance over cord. Keep cord
away from heated surfaces.
» Do not unplug by pulling on
cord. To unplug, grasp the plug,
not the cord.
» Do not handle plug or vacuum
cleaner with wet hands.
» Do not put any object into
openings. Do not use with any
opening blocked; keep openings
free of dust, lint, hair, and anything
that may reduce air flow.
» Keep hair, loose clothing, fingers,
and all parts of body away from
openings and moving parts.
» Turn off all controls before
plugging or unplugging
vacuum cleaner.
» Use extra care when cleaning
on stairs.
» Do not use to pick up flammable
or combustible materials (lighter
fluid, gasoline, kerosene, etc.)
or use in areas where they may
be present.
» Do not use vacuum cleaner in an
enclosed space filled with vapors
given off by oil base paint, paint
thinner, some moth proofing
substances, flammable dust, or
other explosive or toxic vapors.
» Do not use to pick up toxic
material (chlorine bleach,
ammonia, drain cleaner, etc.).
» Do not pick up anything that is
burning or smoking, such as
cigarettes, matches, or hot ashes.
» Do not use without filters in place.
» Do not pick up hard or sharp
objects such as glass, nails, screws,
coins, etc.
» Use only on dry, indoor surfaces.
» Keep appliance on a level surface.
» Do not carry the vacuum cleaner
while it is running.
» Unplug before connecting
or disconnecting the TurboBrush®
Tool or TurboEraser® Pet Tool
(on select models).
READ All InStRUctIonS bEfoRE USInG yoUR UpRIGht VAcUUm.
Always connect to a polarized outlet (one slot is wider than the other). Unplug from outlet when not in use and before conducting maintenance.
When using an electrical appliance, basic precautions should be observed, including the following:
thIS ApplIAncE hAS A
polARIZED plUG
To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified
electrician to install a proper outlet. Do not change the plug in any way.
This model is for household use only.
SAVE thESE InStRUctIonS
foR fUtURE USE
