www.BISSELL.com
8
WARNING
Do not operate vacuum with damp or wet filters, as well as without filters or the Dirt
Container in place. Allow components to dry before reassembling the Dirt Container.
Maintenance: Post-Motor Filter
Located on the front near the height
adjustment knob, remove filter door by
pressing and pulling latch downward.
Remove the filter
by grasping the
handle on the front
of the filter and
pulling out from
vacuum. Tap out
dust or replace
filter as necessary.
1
2
WARNING
To reduce the risk of electrical shock, turn power switch OFF and disconnect polarized plug
from electrical outlet before performing maintenance or troubleshooting checks.
Maintenance: Pre-Motor Filter
NOTE:
Filter can be rinsed in warm water. Allow it to completely dry before
replacing. If the filter is damaged, replace the part.
1
NOTE:
The pleated post-
motor filter may NOT be
washed with water or
detergent. If dust and/or
debris accumulates on filter,
gently tap the filter on the
side of a garbage container.
Replace filter in unit with
handle facing you. Replace
the door by hooking the
bottom into the grooves
and rotate towards unit,
snapping into place.
3
Remove the dirt tank to locate and remove
the pre-motor filter. Pinch the filter and lift to
remove from unit.
Wash the foam filter with water and light dish
soap. Let dry completely before reinserting into
your vacuum.
