www.BISSELL.com
5
Assembly
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
Attach hose by lining the
tabs on the cuff with the
notches on the back of
vacuum. Twist clockwise
to lock hose into place.
Slide handle into
vacuum base. Attach
with the screw that is
taped to the handle.
1
2
5
Push handle end into
base of vacuum on
opposite side.
Slide the Crevice Tool/
Extension Wand Holder
down onto the middle
of the back of base.
3
4
Slide the Pet TurboEraser®
tool holder down on the
top back of the base.
6
To use your optional
Febreze
®
filter (included),
press the tank release
button and pull dirt tank
away from vacuum.
7
Remove the black/
yellow foam filter and
replace with the black
Febreze
®
filter. Be sure
to place the Febreze
®
filter last, covering the
the mesh filter. Place
dirt container back on
vacuum.
