background image

for any technical queries, please contact  

our Technical Helpline at 0845 300 7775

 8

M

aintenance and care

To maintain maximum cleaning performance 

from your bISSEll Powerforce bagless, perform 

these simple maintenance steps.
1.

  Empty the dirt container when the dirt 

reaches the “Full” line on the side. 

2.

  Check the inner and outer circular filters, 

and the pre-motor filter at least once a 

month and clean or replace as needed.

3.

  Clean or replace the post-motor filter every 

three to six months.

note: More frequent filter cleaning or 

replacing may be necessary if you are  

vacuuming new carpet, fine dust, or have 

allergy concerns. follow the instructions on 

the following pages to perform these simple 

maintenance steps.

Emptying dirt container 

The dirt container needs to be emptied when 

the dirt reaches the “full” line on the side of the 

container.
1.

  Unplug cleaner from electrical outlet.

2.

  Slide the Lock ‘n Seal lever to the "Unlock" 

position.

3.

  Grasp handle and pull the dirt container 

straight out to remove from vacuum.

4.

  Empty dirt into garbage container.

5.

  Put the dirt container back in the vacuum 

and slide the lever to the "Lock" position.

note: The dirt container may be washed in 

warm water with a mild detergent. Remove 

the filter cup from the bottom before  

washing. Make sure it is completely dry 

before reassembling with the filter cup.

WARnInG:

 

To reduce the risk of 

electric shock, turn  

power switch Off and 

disconnect plug from 

electrical outlet before 

performing maintenance 

or troubleshooting 

checks.

Tip:

For maximum cleaning 

performance, check 

and clean or replace all 

filters as suggested.

Lock Position

Full Line

Unlock 

Position

Summary of Contents for PowerForce 75Q1 Series

















Reviews: