6
BISSELL.com
Cleaning & Replacing the Filter
Go to
support.BISSELL.com
for tips on maintaining and replacing your vacuum filter.
1.
Turn machine OFF.
To clean the filter, remove
dirt tank by pressing the tank
release button and sliding the
tank out.
2.
Twist top to remove filter
frame from the separator.
Remove the filter from the
filter frame housing. Tap the
filter against the side of a trash
bin to remove dust and debris.
3.
To clean, rinse under warm
water and squeeze to remove
dirt. Lay out for 24 hours, until
completely dry. Make sure to
reinsert your filter into the
frame with the tag side down
(touching the frame) before
using your machine.
For best cleaning performance, always clean your filter after each use.
Maintaining the Brush Roll
Go to
support.BISSELL.com
for tips on maintaining and replacing your brush roll.
1.
Turn the machine OFF and
press the foot release button
to disconnect the motorized
cleaning foot.
2.
Twist the bottom screws
with a coin to remove bottom
cover.
3.
Remove the brush roll cover
and clear any debris from
brush roll.
4.
Reattach brush roll by
inserting into the belt and
pressing in to place.
5.
Attach and secure bottom
cover.
