background image

w w w. b i s s e l l . c o m  

A

ssembly 

charging the battery

1. 

When completely charged, the Perfect 

Sweep TURBO provides up to 60  

minutes of full cleaning power.

2. 

When charging for the first time, allow 

to charge uninterrupted for at least 16 

hours. Thereafter, charge at least 12 

hours to renew the Perfect Sweep TURBO 

battery. The charging indicator light will 

illuminate when properly connected and 

will not turn off when fully charged.

note: the power switch must be in 

the off position when charging.

3. 

Decreased operating time may indicate 

the battery has built up a charging 

resistance. To recharge, first completely 

exhaust the battery, recharge it, then 

exhaust it again before recharging a  

second time. This procedure may be 

required more than once.

4. 

When charging is complete, be sure to 

unplug the Perfect Sweep TURBO from 

the charger.

using your perfect sweep tuRbo

the perfect sweep tuRbo is a quick 

and easy way to clean your bare 

floors and carpet.

1.

  Tip back the handle into typical use  

position and gently tap the power switch 

on the sweeper with your foot.

note: the unit will not turn on if the 

dirt cup is not secure.

2.

  To clean small areas, detach the handle 

by depressing the handle clip button 

where the bottom of the handle slides 

into the Perfect Sweep TURBO and pull 

the entire handle assembly out. Use the 

Perfect Sweep TURBO by holding the 

built-in hand grip.

3.

  When done, replace the handle (if 

detached) and store for the next use.

5

O

perations

attention:

  

If your battery still fails to 

recharge or does not hold a 

charge of normal duration, call:

bissell consumer services

Listed on page 8 

Or visit our website at  

www.bissell.com 

1

2

WaRning:

Perfect Sweep TURBO 

will not pick up crayons, 

marbles, and other 

large 

or hard objects.

Summary of Contents for perfect sweep turbo 29L9 series









Reviews: