background image

6

POW

ER

HEA

TER

Product Features Continued

Vacuum Flex Hose with Grip/Trigger Unit

Store  in the on-board hose storage on the back of the Little Green.
Cleaning tools attach to the Grip/Trigger unit.

Power Cord

The cord, with a three-prong grounded plug, stores in the On Board
Cord Storage at the bottom of the Little Green.

Note: Unwrap Power Cord completely before 

operating unit.

Built-in-heater

Not included with all models

With the Little Green ProHeat, you have the ability to turn on, or leave
off, the built-in heater, based on your cleaning needs.

The Little Green ProHeats’ built-in heater will raise the water temperature
for improved cleaning performance. To use Little Greens’ built-in heater,
first turn the Power Switch ON and then turn the Heater Switch ON.
Within 30 seconds, the Heat Indicator Light will illuminate, indicating the
heater has reached the correct temperature.

Begin using by depressing the Spray Trigger. Wait 5-10 seconds for
non-heated water and solution mixture to travel through the Flex
Hose. After 5-10 seconds, the heated water and solution mixture is
ready to be applied to carpet or upholstery.

See Page 8 for cleaning instructions.

Depending on which model you purchased, your
Little Green may be equipped  with one or more of
these tools:

4” wide Cleaning Tool (included with all models)-For 
cleaning carpet, upholstery and spot cleaning

Spraying Crevice Tool-For cleaning in tight areas

6” wide Cleaning Tool-For larger areas

TurboBrush Cleaning Tool-Rotating brush for extra cleaning
action for small areas, upholstery and stairs

To order optional tools not originally included with your  Little Green
see

“Part Numbers and Descriptions,”

page 9

Specialized Cleaning Tools

1.

2.

3.

4.

WARNING: 

Use only BISSELL Little
Green formula in your
cleaner. Use of cleaning
formulas which contain
lemon or pine oil may
damage this appliance 
and void warranty.
Chemical spot cleaners
or solvent-based soil
removers should not be
used. These products
may react with the plas-
tic materials used in
your cleaner, causing
cracking or pitting.

BR

US

H

SU

CT

IO

N

Power Switch

Heater Switch

Heat
Indicator
Light

Summary of Contents for Little Green 1720 Series













Reviews: