background image

w w w. b i s s e l l . c o m  

A

ssembly

5

no tools are required for assembly;  

simply insert foot into body of unit until 

you hear a click.

charging

before charging, make sure unit is  

in the off position. 

1. 

Insert the charging adapter plug into the 

charging port on the back of the unit. 

2. 

Plug the adapter into the wall outlet. The red 

indicator light will illuminate and remain on 

when plugged into wall outlet.  Charge the 

unit completely for 24 hours prior to first use.

note: the adapter may become warm 

during charging – this is normal.

3. 

When the unit is fully discharged, approxi-

mately 16 hours of charging is required 

for the battery to regain full capacity. 

Power switch

the power switch is located on the top  

of the handle.  settings include:
(o) = off
(i) = suction on 
(bRusH) = suction and brush on 

using your stick vacuum

1. 

Push power switch on to desired setting.

2. 

Easily clean hard floors, low pile carpet, 

and area rugs.  

3. 

When finished cleaning, turn power 

switch to oFF (o) position.

2-way folding handle

for cleaning under couches, beds and 

other hard to reach areas.

1. 

To release, push button located under 

power switch to bend handle forward  

for cleaning under furniture.  

2. 

For space saving storage, push button  

to bend handle backward.

1.

1.

2-Way Folding 

Handle Release

O

perations

Summary of Contents for Lift-Off Floors & More 10Z3-E SERIES













Reviews: