9
Cleaning & Replacing the Brush Roll & Nozzle
WARNING
To reduce the risk of fi re, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1.
Grasp the top of the Brush
Roll Nozzle at each side and
pull upward to remove.
2.
Pull Brush Roll out by
grabbing the Brush Roll tab
and pulling upward.
3.
Rinse your Brush Roll and
Brush Roll Nozzle with warm
water. The Nozzle Clean Out
Tool can be used to remove
hair and debris.
Note:
These
parts are not dishwasher or
automatic washing machine
safe.
If your Brush Roll chamber is
dirty, clean with a cloth.
4.
Let your Brush Roll and
Brush Roll Nozzle dry before
reassembling.
5.
Replace Brush Roll by
inserting the Brush Roll end
into the right side of the Foot.
Then lock the pull tab into
place by pressing downward.
6.
Replace the Brush Roll
Nozzle by first lining up both
Brush Roll Nozzle tabs with the
edges of the Foot.
7.
Press the nozzle back into
place until you hear a “click”.
