background image

www.bissell.com

15

T

roubleshooting

Reduced Spray or No Spray

Possible causes 

Remedies

1.  Water tank may be empty 

1.  Fill clean tank with clean, hand hot (60°C/140°F MAX)   

  

  tap water. Do not boil or microwave water as it can destroy  

  

 

the tank.

2.  Tank may not be seated completely 

2.  Turn power OFF (

0

). Remove and reseat tank

3.  Pump may have lost prime 

3.  Turn power OFF (

0

) and then back ON (I). Wait one minute,  

  

  then depress trigger

4.  Debris filter on base is clogged 

4.  Use hand to remove debris

DirtLifter™ PowerBrush does not turn

Possible causes 

Remedies

1.  The belt is off or broken 

1.  Turn power OFF (

0

) and unplug unit from outlet. Follow  

  

  instructions starting on page 13

2.  The unit is in the upright position 

2.  Brushes only rotate when unit is reclined using the  

  

 

recline handle

3.  Circuit breaker on machine may have tripped 

3.  Turn the machine OFF (

0

) and unplug from outlet. Check  

  

  to see if foreign object is caught in brush roll. Remove  

  

  object. Plug machine in to reset circuit breaker

Cleaner not picking up solution

Possible causes 

Remedies

1.  Tanks may not be seated properly 

1.  Pick up both the clean and dirty water tanks and reseat  

  

  them so they fit snuggly on the unit 

2.  Clean water tank is empty 

2.  Check fluid levels in clean water tank and refill if necessary 

3.  Dirty water tank has picked up the maximum amount 

3.  Empty dirty water tank. Refill clean water tank with water  

of dirty water and the red float door has closed  

  and formula. Place both tanks back onto unit 

4.  Red float “door” in the tank may have closed as a result of 

4.  Turn the machine OFF (

0

), allowing red float door to release  

bumping an object or moving machine back and forth too quickly    into the open position,. Turn the unit back ON (

I

) to  

  

  continue cleaning. Be sure your forward and backward  

  

  strokes are completed at a slower pace

5.  Front nozzle of machine is clogged 

5.  Use fingers to remove any debris from this area

6.  Upper body filter is clogged 

6.  Use fingers to remove any debris from this area

Other maintenance or service not included in the manual should be  

performed by an authorized service representative.

Thank you for selecting a BISSELL product.

Please do not return this product to the store.

             

For any questions or concerns,  

 contact BISSELL Consumer Care.

WARNING:

  

To reduce the risk of fire, electric 

shock, or injury, turn power  

Off and disconnect plug from 

electrical outlet before performing 

maintenance or troubleshooting.

Summary of Contents for Healthyhome 48F3 SERIES





















Reviews: