7
Cleaning With The Canister
Your BISSELL Easy Vac PowerBrush is not only a convenient
upright bare floor and carpet cleaner, it's also a versatile
floor/above floor vacuum cleaner when you detach the
lightweight canister.
Detach the Upright Handle by pressing your thumb and
forefinger on the lock buttons on Canister (using a "pinch-
ing" motion) while gently pulling Handle off square end of
Canister.
For floor surface or stairs cleaning, use the Floor Nozzle fol-
lowing the directions for the Power Switch settings.
For edge or small area cleaning, remove the Floor Nozzle
and unplug from the Canister. You can then use the canis-
ter directly or place the Crevice Tool in the round opening
for added versatility.
To resume upright cleaning, reattach the Floor Nozzle and
plug into the back of the Canister.
Detach the Hose from the Hose Port at the
bottom/back of the Canister. Press the lock
button and pull the Hose from the Port. Insert the Crevice
Tool into the end of the Hose.
To resume canister or upright cleaning, remove Crevice Tool
and store in Crevice Tool Clip. Reconnect Hose to the Hose
Port, making sure it is locked fully in place.
Your Easy Vac PowerBrush features a translucent plastic Dirt Cup,
so you can easily see when it needs to be emptied. For best
performance, empty when debris reaches halfway up the cup
.
Press the lock button down and forward (away from the
Canister Handle) while lifting the upper portion of the Dirt
Cup away from the Canister.
Grasp the Filter frame and pull it straight up from the Dirt
Cup. Empty the Dirt Cup and check for cleanliness and
damage. You may wash the Cup with warm (not hot) water
and mild liquid dish soap only. Rinse and dry thoroughly
before reattaching it.
1.
2.
3.
4.
Cleaning With Ready To Use Hose
1.
2.
Emptying The Dirt Cup
1.
2.
