BISSELL.com
7
7.
Pull the brush roll tab to
remove. To remove the brush
roll filter, which sits behind the
brush roll, pull up on the black
tab.
8.
The brush roll, window and
brush roll filter can be hand
washed. Use the cleaning tool
to scrub parts.
9.
Use the hook on the
cleaning tool to remove hair
and debris from brush roll.
10.
Remove the machine from
the dock and wipe out the tray.
11.
Leave all parts out to
dry for 24 hours before
reassembling.
12.
Place the end of the brush
into the left side of the foot.
Press the tab of the brush
down so it locks into place.
13.
Replace the brush roll
window by aligning window
with foot. Press the window
down until it clicks into place.
14.
Reassemble the dirty
water tank.
Note:
Filter must
be completely dry before
reinstalling.
15.
Insert the bottom of the
tank first. Pivot the top toward
the machine until it clicks into
place.
NOTICE
To reduce the risk of a leaking condition, do not store machine where freezing may occur. Damage to internal
components may result.
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting on the dock.
Storing Your Machine
Store your machine in a protected, dry area. Since this product uses water, it must not be stored
where there is danger of freezing. Freezing will damage internal components and may void the
warranty.
After-Cleaning Care (continued)
