Bissell CROSSWAVE HF3 3649 Series Manual Download Page 2

2

   BISSELL.com

IMPORTANT SAFETY INSTRUCTIONS

WARNING 

TO REDUCE THE RISK OF FIRE, ELECTRIC 

SHOCK OR INJURY:

• Unplug from electrical socket when not in use, 

before cleaning maintaining or servicing the 

appliance.

• Use indoors only.

• Do not immerse. Use only on hard floor 

surfaces moistened by cleaning process.

• Use only cleaning products intended for 

use with this appliance to prevent internal 

component damage. See the Cleaning 

Formulas section of this guide.

• Do not allow to be used as a toy. Close 

attention is necessary when used by or near 

children.

• Do not use for any purpose other than 

described in this user guide. Use only 

manufacturer’s recommended attachments.

• Do not charge with damaged cable or plug. If 

appliance is not working as it should, has been 

dropped, damaged, left outdoors or dropped 

into water, have it repaired by a qualified 

technician.

• Do not pull or carry by cord, use cord as a 

handle, close door on cord, or pull cord around 

sharp edges or corners. Do not run appliance 

over cord. Keep cord away from heated 

surfaces.

• Do not unplug by pulling on cord. To unplug, 

grasp the plug, not the cord.

• Do not handle plug or appliance with wet 

hands.

• Do not put any object into openings. Do not 

use with any opening blocked; keep openings 

free of dust, lint, hair, and anything that may 

reduce air flow.

• Keep hair, loose clothing, fingers, and all parts 

of body away from openings and moving parts 

of the appliance and its accessories.

• Use extra care when cleaning on stairs.

• Do not use to pick up flammable or 

combustible materials (lighter fluid, gasoline, 

kerosene, etc.) or use in areas where they may 

be present.

• Do not pick up anything that is burning or 

smoking, such as cigarettes, matches, or hot 

ashes.

• Do not use without filters in place.

• Risk of injury from moving parts. Brush roll 

may start unexpectedly. Turn OFF before 

cleaning or servicing.

• Turn OFF all controls, including the Power 

Switch and disconnect charger from electrical 

outlet before making any adjustments, 

performing maintenance, troubleshooting, 

changing accessories or storing appliance. 

Such preventative safety measures reduce the 

risk of starting the appliance accidentally.

• Recharge only with the charger specified by 

the manufacturer. A charger that is suitable for 

one type of battery pack may create a risk of 

fire when used with another battery pack.

• Use only with Shi Ying Yuan SAW15A-260-

0500UD charger or Yinli YLJXA-T260050 

charger.

• Battery pack, charging port on the appliance 

and charger output are not to be short-

circuited.

• Do not use appliance that is damaged or 

modified. Damaged or modified batteries may 

exhibit unpredictable behavior resulting in 

fire, explosion or risk of injury.

• Do not expose battery pack or appliance to 

fire or excessive temperature. Exposure to fire 

or temperature above 130°C/265°F may cause 

explosion.

• Follow all charging instructions and 

do not charge the appliance outside of 

the temperature range specified in the 

instructions. Charging improperly or at 

temperatures outside of the specified range 

may damage the battery and increase the 

risk of fire.

• Have servicing performed by a qualified repair 

person using only identical replacement parts. 

This will ensure that the safety of the product 

is maintained.

• Do not modify or attempt to repair the 

appliance except as indicated in the 

instructions for use or care.

• Keep the temperature range of between 

4-40°C/40-104°F when charging battery, 

storing unit or during use.

• Do not charge the machine outdoors.

• Do not turn your appliance ON until you are 

familiar with all instructions and operating 

procedures.

• This appliance contains batteries that are non-

replaceable.

• Do not incinerate the appliance even if it is 

severely damaged. The batteries can explode 

in a fire.

• The battery must be removed from the 

appliance before it is scrapped.

• Keep appliance on a level surface.

• Do not use appliance in an enclosed space 

filled with vapors given off by oil-based 

paint, paint thinner, some moth-proofing 

substances, flammable dust, or other 

explosive or toxic vapors.

• Do not use to pick up toxic material (chorine 

bleach, ammonia, drain cleaner, etc.)

• Do not pick up hard or sharp objects such as 

glass, nails, screws, coins, etc.

• Plastic film can be dangerous. To avoid danger 

of suffocation, keep away from children.

SAVE THESE INSTRUCTIONS 

THIS MODEL IS FOR HOUSEHOLD USE ONLY. COMMERCIAL USE OF THIS UNIT VOIDS THE MANUFACTURER’S WARRANTY.

IMPORTANT INFORMATION 

• Keep appliance on a level surface.

• If your appliance has a motorized brush roll, do not leave machine running in the same spot without the handle fully upright.

• To reduce the risk of a leaking condition, do not store where freezing may occur. Damage to internal components may result.

READ ALL INSTRUCTIONS BEFORE USING YOUR APPLIANCE.

When using an electrical appliance, basic precautions should be observed, including the following:

WARNING 

This product contains Lithium-Ion rechargeable batteries. DO NOT mix Lithium-Ion batteries with general household waste. 

According to Federal and State regulations, removal and proper disposal of Lithium-Ion batteries is required. For specific 

battery disposal instructions please contact Call2Recycle at 877-723-1297 or visit www.call2recycle.org. For full instructions 

on battery removal for recycling visit support.BISSELL.com.

Summary of Contents for CROSSWAVE HF3 3649 Series









Reviews: