8
BISSELL.com.au
Cleaning the Machine
Our helps doesn’t stop here, visit
support.BISSELL.com
for additional help.
WARNING
To reduce the risk of electric shock, turn power OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
1.
Turn the machine OFF and
wrap up the Power Cable.
Make sure the Dirty Water
Tank and the Formula & Water
Tank are emptied, rinsed and
dried before the next use.
2.
Remove portable spot &
stain cleaner from the base of
the machine.
3.
Remove the nozzle
assembly by unscrewing 3
screws and lifting away the
upper and lower nozzle.
4.
Rinse upper and lower
nozzles under clean water.
5.
Place lower nozzle back
onto the machine by hooking
the tabs into the holes on the
bottom sides of the front of
the machine.
6.
Place upper nozzle onto the
lower nozzle by hooking the
tabs into the holes on the front
of the lower nozzle. Secure
with 3 screws.
7.
Clean the spray tips. To
remove black spray tip, unlatch
tab on front of spray tip from
base of machine and pull up
and out of green receiver.
8.
Rinse under water to clean.
9.
Replace spray tip by
inserting back into red receiver
and latching tab into base of
machine. Repeat steps for
second spray tip.
Summary of Contents for CLEANVIEW LIFT-OFF 1190G
Page 11: ...BISSELL com au 11...
