w w w . b i s s e l l . c o m
19
M
aintenance and care
Brushes can be removed for cleaning
or replacement as needed.
1.
Follow small belt removal Instructions on
page 18.
2.
Remove brush rolls by pulling them off
of the metal rods.
3.
Place cleaned or new brush rolls back
onto the rods. Make sure one washer is
on each end of the rollers prior to sliding
onto the rod. Be sure to let the rod slide
through the bushing to insure proper fit.
4.
Re-attach the long belt on the bottom to
the cogs of the small roller brushes.
5.
Place small belt over back roller and
metal cog.
6.
Place pivot arm in place and screw in
place using the silver screw.
7.
Re-attach clear end cap by tightening
with the (2) black screws.
8.
Return front nozzle to front of unit, by
latching from underneath and then
securing with a screw.
If you have any questions or are having
trouble installing or replacing your
belt(s) or brushes, please call
BISSELL
Consumer Services.
2.
4.
6.
8.
3.
5.
7.
Brush removal and large belt replacement
WARNING:
To reduce the risk of fire,
electric shock or injury,
unplug from the outlet
before servicing.
