background image

w w w . b i s s e l l . c o m  

7

O

perations

Special tools

Your BISSELL Cleanview Pet Plus is not 

only a powerful carpet and rug vacuum 

cleaner, it’s also a versatile above floor 

vacuum cleaner when you select one of 

the special tools.
1. 

Raise handle to upright position.

2. 

Grasp the Quick Reach handle and lift hose 

wand to separate from suction intake opening.

3. 

Attach tools by firmly pushing onto  

vacuum hose or extension wand.

 

Combination Dusting Brush/Upholstery 

Tool: 

 

Two types of cleaning tools are included 

in one attachment; rotate for desired tool.

 

Use brush side to dust furniture, blinds, 

books, lamps, shelves and baseboards.

■ 

Use upholstery side for curtains, draper-

ies, cushions and fabrics.

 

Crevice Tool:

 Use in tight, narrow spaces.

 

Extension Wand:

 Use with desired  

attachment for a longer reach.

 

TurboBrush tool:

 Use rotating brush action 

for small areas such as stairs and upholstery.

NOTE: Press gently when using the 

TurboBrush tool to gain maximum  

cleaning. Too much pressure will 

cause the brush to stop rotating. 

Power cord

When you are done using your  

BISSELL Cleanview Pet Plus, return it 

to the upright position and store the 

power cord.
1. 

Turn power switch OFF.

2. 

Unplug power cord by grasping the plug 

(NOT the cord) and disconnect from outlet.

3. 

Loop power cord around cord wraps on 

side of vacuum cleaner.

4. 

Clip molded plug to power cord to secure.

 

NOTICE: 

The floor brush will continue to rotate while 

you use your vacuum for above floor 

cleaning. To prevent carpet damage, do 

not lean on the vacuum or let the power-

foot tilt forward.

 

CAUTION: 

The rotating floor brush continues 

to rotate while tools are in use. To 

reduce the risk of injury from mov-

ing parts, always move the cleaner 

with the carrying handle at the 

back of the cleaner. Always place 

the vacuum cleaner on the floor 

with the handle in upright position 

when using tools. Never place your 

fingers under the cleaner when it is 

running. Never place powerfoot on 

furniture or uneven surfaces. Do not 

place vacuum cleaner close enough 

to objects to pull them into rotating 

brush.

Tip:

Hair, string and 

small objects 

can block the 

vacuum hose or 

tools. Check them 

occasionally for 

obstructions.

NOTICE: 

While vacuuming, certain carpets and low 

humidity conditions may generate small 

static discharges. The discharges are entirely 

harmless and are not associated in any way 

with the main power supply.

Summary of Contents for CLEAN VIEW 74T5

















Reviews: