Bissell BigGreen Commercial BG10 User Manual Download Page 7

w w w . b i s s e l l c o m m e r c i a l . c o m   8 5 5 . 5 4 4 . 7 3 3 6

7

M

aintenance and care

  

Machine care

For best results, a few simple steps can 

assure your machine is well maintained 

after your cleaning is complete
1. 

turn power off (

0

). unplug the machine 

and wrap the power cord.

2. 

after emptying the clean and dirty 

water tanks, rinse them out with running 

hot tap water.

3. 

the top half of the dirty water tank can also 

be rinsed clean through the nozzle area. 

4. 

after carpet is dry, vacuum again to 
remove hair and fuzz.

Belt removal and replacement

1. 

turn off the machine and unplug it from 

the outlet.

2. 

Remove the dirty and clean water tanks 

from the base of the machine. 

3. 

While standing behind the unit, lay the 

unit on its’ side (cord side up)

4. 

looking at the bottom of unit, find 

the back center of the brush carriage 

where the carriage latch is located. it 

is between the brush assembly and the 

front wheels.

5. 

pull brush carriage towards you with  

one hand until it stops, then pinch the 

carriage latch with other hand while 

pulling the carriage towards you. the 

carriage should swing out to access belt 

cover.

6. 

Remove three screws from cover. lift and 

remove to access brush carriage. 

7. 

turn the belt inward towards the large 

pulley while lifting out. 

8. 

place new belt over small pulley first and 

then slip the belt over the large pulley.

9. 

Replace the brush carriage and screws. 

10. 

push brush carriage back into place  

making sure the carriage latch locks 

back into place.

4.

6B.

6A.

8.

10.

3.

5.

7.

9.

WARNING:

  

to reduce the risk of fire, electric 

shock, or injury,turn power  

off and disconnect plug from 

electrical outlet before performing 

maintenance or troubleshooting.

Summary of Contents for BigGreen Commercial BG10













Reviews: