www.bissell.com.au
1.800.811.183 / 0800.247.735
15
M
aintenance and care
Brush removal and
replacement continued
7.
With cover removed, the brush comes
out easily by tilting the loose end out of
the carriage.
8.
To replace the brush roll back into the
unit, place the large open end of the
brush onto the carriage and tilt opposite
end back into place.
9.
With the brush sitting relatively straight
up and down by itself, place endcap
back on top and replace three screws.
The brush will need to be held and
centered to the cover while placing it
back on.
10.
Spin the brush by hand to make sure it
turns freely with some minor resistance
from the motor. Push brush carriage
back into place with a light pull against
the lock.
7.
9.
10.
8.
WARNING:
To reduce the risk of fire, electric
shock, or injury,turn power
OFF and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.
