background image

www.BISSELL.com   

   

2

IMPORTANT SAFETY INSTRUCTIONS

WARNING

TO REDUCE THE RISK OF FIRE, 

ELECTRIC SHOCK, OR INJURY:

»  Connect to a properly grounded 

outlet only. See grounding  
instructions. Do not modify the 

3-prong grounded plug.

»  Do not leave appliance when it is 

plugged in. Unplug from outlet when 

not in use and before servicing.

»  Use indoors only.
»  Do not allow to be used as a toy. 

Close attention is necessary when 

used by or near children.

»  Do not use for any purpose other 

than described in this User’s 

Guide. Use only manufacturer’s 

recommended attachments.

»  Do not use with damaged cord  

or plug. If appliance is not  
working as it should, or has been 

dropped, damaged, left outdoors, 
or dropped into water, have it 
repaired at an authorized  
service center.

»  Always install float before any wet  

pick-up operation.

»  Do not pull or carry by cord, use 

cord as a handle, close a door on 

cord, or pull cord around sharp 

edges or corners. Do not run 
appliance over cord. Keep cord 

away from heated surfaces.

»  Do not unplug by pulling on  

cord. To unplug, grasp the plug, 

not the cord. 

»  Do not handle plug or appliance 

with wet hands.

»  Do not put any object into open-

ings. Do not use with any opening 

blocked; keep openings free of 
dust, lint, hair, and anything that 

may reduce air flow.

»  Keep hair, loose clothing, fingers, 

and all parts of body away from 

openings and moving parts.

»  Turn off all controls before plug-

ging or unplugging appliance.

»  Use extra care when cleaning  

on stairs.

»  Do not use to pick up flammable 

or combustible materials (lighter 
fluid, gasoline, kerosene, etc.)  
or use in areas where they may  
be present.

»  Do not use appliance in an 

enclosed space filled with vapors 

given off by oil base paint, paint 
thinner, some moth proofing  
substances, flammable dust,  
or other explosive or toxic vapors.

»  Do not use to pick up toxic  

material (chlorine bleach,  
ammonia, drain cleaner, etc.).

»  Do not pick up anything that  

is burning or smoking, such as 

cigarettes, matches, or hot ashes.

»  Use only BISSELL cleaning  

products intended for use  
with this appliance to prevent  
internal component damage.  
See the Cleaning Fluid section  
of this guide. 

»  Unplug before connecting 

TurboBrush Tool.

»  Do not immerse. Use only on  

surfaces moistened by the  
cleaning process.

»  Keep appliance on a level surface.
»  Do not carry the appliance while  

in use.

READ ALL INSTRUCTIONS BEFORE USING YOUR DEEP CLEANER.  

When using an electrical appliance, basic precautions should be observed, including the following: 

This model is for household use only. Commercial use of this unit voids the manufacturer’s warranty.

SAVE THESE INSTRUCTIONS  

FOR FUTURE USE

WARNING

Improper connection of the equipment-grounding conductor can 

result in a risk of electrical shock.  Check with a qualified electrician 

or service person if you aren’t sure if the outlet is properly grounded. 

DO NOT MODIFY THE PLUG. If it will not fit the outlet, have a proper 

outlet installed by a qualified electrician. This appliance is designed 

for use on a nominal 120-volt circuit, and has a grounding attachment 

plug that looks like the plug in the illustration. Make certain that the 

appliance is connected to an outlet having the same configuration as 

the plug. No plug adapter should be used with this appliance.

GROUNDING INSTRUCTIONS

This appliance must be connected to a grounded wiring system. If it 

should malfunction or break down, grounding provides a safe path 

of least resistance for electrical current, reducing the risk of electrical 

shock. The cord for this  

appliance has an equipment-grounding  

conductor and a grounding plug. It must  

only be plugged into an outlet that is  

properly installed and grounded in  

accordance with all local codes and ordinances.

Grounded 

Outlets

Grounding Pin

Summary of Contents for 899110 17N4 SERIES





















Reviews: