background image

Fingertip brush switch

The rotating brush is turned on or off using the 
switch at the side of the top of the handle. The 
brush will start rotating when the unit is reclined. 
The brush should be on for most carpeted floors. 
You may want to turn the brush off for bare floor 
cleaning or other delicate surfaces.

To turn the brush ON, press       button once.

To turn the brush OFF, press       button again.

Brush auto shut-off feature

When your cleaner is in the upright position, the 
brush will not rotate. The brush will rotate only 
when the cleaner is in the reclined position and 
the brush switch is on.

 

Microban

®

 antimicrobial protection fights the 

growth of odor causing bacteria, mold and 
mildew in your vacuum. It is built-in to key 
components during the manufacturing process 
and won't wash off or wear away. Microban 
provides continuous antimicrobial product 
protection for the useful lifetime of the product 
keeping your vacuum cleaner and fresher. 

Note: This should not replace normal 
cleaning and maintenance procedures.

Microban is a registered trademark of Microban Products Company.

Acarosan

®

 Dust Mite Control

Select models only 

BISSELL Acarosan dust mite control products kill 
dust mites, which aids in a complete cleaning 
program. Acarosan spray can be used on 
carpets, mattresses and upholstery, Acarosan 
powder is designed to be used on carpets and 
rugs. The Acarosan spray comes with a trigger 
for easy use. Just untwist the cap on the bottle, 
and replace with the trigger which has been 
provided. Twist the trigger on to secure. 
For complete instructions and further 
information, please see the labeled products or 
log on to www.acarosan.com. To re-order, see 
Replacement Parts on pg. 19.

Acarosan is a trademark of Allergopharma. 

O

peration

 7

w w w . b i s s e l l . c o m   8 0 0 . 2 3 7 . 7 6 9 1

Microban

®

 antimicrobial product protection

ug203-1369_5770_507.indd   7

ug203-1369_5770_507.indd   7

5/31/07   1:15:44 PM

5/31/07   1:15:44 PM

Summary of Contents for 5770 SERIES





















Reviews: