background image

w w w. b i s s e l l . c o m  

0

perations

6

fill the tank

1. 

remove the clean water/solution tank by 

lifting it straight up, then away from the 

lower body.

2. 

Unscrew the black cap at the bottom of 

the clean water/solution tank.

3. 

fill to the formULA line with BISSELL  

2X cleaning formula. fill the rest of the 

tank with hand hot (60°C/140°f mAX) 

tap water to the water fill line. replace 

and tighten the black cap.  

note: do not boil water or  

microwave water as it can  

damage the tank.

4. 

Place clean water/solution tank on  

lower body.

5. 

rotate Quick release Cord Wrap™  

to release the power cord and plug  

into an outlet.

carpet cleaning

1. 

With your foot, press the red power 

switch [located in foot of unit] on .

2. 

With foot, press the detent lever on left 

side of lower body.

3. 

Depress spray trigger to spray cleaning 

solution. 

do not overwet.

4. 

To suction up water, repeat motion over same 

area without pressing the spray trigger.

5. 

repeat steps 3 and 4 until no more dirt 

can be removed.

6. 

Continue to clean entire carpet, working 

in 1m x 1m sections.

7. 

Empty the collection tank when dirty water 

reaches the full line, or when the clean 

water/solution tank is empty. 

8. 

If floor nozzle stops spraying, turn power 

switch off and check water and cleaning 

solution levels. refill if needed.

Tip:

It is recommended  

that every time your 

clean water/solution 

tank needs refilling, 

that you empty the 

contents of the  

collection tank. If the 

collection tank gets too 

full, you may begin to 

see foam spitting out 

of the vent cover. If 

this happens, empty 

the collection tank.

WaRning:

To reduce the risk of fire, use only 

BISSELL cleaning formulas for 

full size machines in your deep 

cleaner. Use of cleaning formulas 

that contain lemon or pine oil may 

damage this appliance and void 

guarantee. Chemical spot clean-

ers or solvent-based soil removers 

should not be used. These products 

may react with the plastic materials 

used in your deep cleaner, causing 

cracking or pitting.

2.

Tip:

Deep cleaning spots, spills, and 

high traffic areas on a regular 

basis can prolong carpet life.

Power 

Switch

Detent 

Lever

Summary of Contents for 54K2 SERIES QuickWash













Reviews: