w w w. b i s s e l l . c o m
7
Handle Positions
Using your foot, press the handle
release pedal, located on the lower
left side of the vacuum to recline to
a cleaning position.
1. Upright
– For storage and above floor
cleaning with tools.
2. Normal Cleaning
– Press handle release
pedal once. This position is used for most
household floor cleaning tasks.
Transporting your cleaner
1.
To move your vacuum cleaner from room
to room, put the handle in the upright
position, tilt the cleaner back on its rear
wheels and push forward.
2.
The vacuum cleaner can also be moved by
using the carry handle on the back.
Height Adjustments
There are seven height settings
available for various floor surfaces.
Turn the dial on the foot of the
cleaner to the desired setting.
Lowest setting
– for low pile carpeting
or bare floors. To pick up debris it may be
necessary to move up one setting.
Medium settings
– for medium pile carpet.
High setting
– for high pile and most
shag/frieze carpet.
Note: For optimal carpet cleaning
performance, adjust to the lowest
practical setting. If your cleaner is
difficult to push, adjust to the next
higher setting.
If the dial is difficult to turn, tilt the cleaner
back slightly to take the weight off of the
foot while turning.
A
ssembly
O
perations
ATTENTION:
Some frieze carpets have long, delicate
fibers or threads that may be damaged
by the rotating brush during vacuuming.
It is recommended the rotating brush be
turned OFF when cleaning this type of
carpet.
Tip:
Before cleaning under low furniture,
check area first for objects that
might harm the unit or block the
vacuum hose
1.
2.
